Projects ยท Works On My BenchNew projects and new parts of existing ones.https://worksonmybench.dev/en-usDIY Dethatcher Attachment for a Rear-Tine Tillerhttps://worksonmybench.dev/projects/tiller-dethatcher/https://worksonmybench.dev/projects/tiller-dethatcher/How I built a DIY dethatcher for my rear-tine tiller from steel tube and spring steel wire, and pulled 2.5 cubic yards of moss out of my lawns.Mon, 02 Nov 2026 00:00:00 GMTFabricationtillerdethatchinglawnwelding3d-printingcadDIY Dethatcher Attachment for a Rear-Tine Tiller: Design in CADhttps://worksonmybench.dev/projects/tiller-dethatcher/01-design/https://worksonmybench.dev/projects/tiller-dethatcher/01-design/Nested steel tubes with matching holes and a clamping bolt: how one bolt holds every spring steel tine in place and carries the support wheel.Mon, 02 Nov 2026 00:00:00 GMTFabricationtillerdethatchinglawnwelding3d-printingcadDIY Dethatcher Attachment for a Rear-Tine Tiller: The Buildhttps://worksonmybench.dev/projects/tiller-dethatcher/02-build/https://worksonmybench.dev/projects/tiller-dethatcher/02-build/Tacking the tubes together, drilling the hole pattern with hardened bushings in a 3D-printed block, then welding the end caps and nut for the clamp.Mon, 02 Nov 2026 00:00:00 GMTFabricationtillerdethatchinglawnwelding3d-printingcadDIY Dethatcher Attachment for a Rear-Tine Tiller: In Action on a Mossy Lawnhttps://worksonmybench.dev/projects/tiller-dethatcher/03-in-action/https://worksonmybench.dev/projects/tiller-dethatcher/03-in-action/Two passes in a grid, mowing up after each, for about 2.5 cubic yards of moss and grass bits, and what the tree roots did to the tines.Mon, 02 Nov 2026 00:00:00 GMTFabricationtillerdethatchinglawnwelding3d-printingcad